Pro Convert for NDI® to SDI

£0.00

Converts a live NDI® stream into SDI

  • Connects baseband presentation or distribution equipment into IP-based media networks
  • Supports NDI technology including full-bandwidth NDI and high-efficiency NDI|HX mode
  • Supports streaming protocols including SRT, RTSP, RTMP, UDP, RTP, HLS and HTTP

Interface

SPECIFICATION & FEATURES

  • Output Features

    • Support for up to 1920×1080 60fps SDI output
    • Support for 48KHz, 16-bit 8-channel audio streams

    Decoding Features

    • Support for decoding up to 2K 60fps NDI streams
    • Support for decoding full NDI® and NDI®|HX
    • Support for NDI 5.x
    • Discover NDI devices across network segments
    • Compatible with H.264/H.265 streams in additional protocols including RTSP, HTTP, HLS, RTMP Pull/Push and MPEG-TS over UDP/SRT/RTP

    Features & Advantages

    • Very low latency
    • Advanced configuration and device status through intuitive Web GUI, keyboard/mouse, or on-board controls
    • HTTP-based APIs for custom integration
    • Image flip for inverted projector installations
    • Safe area controls

Full specifications and features

Output Features

  • Max output: 1920x1080p60. Supported output formats are:
    • 1920x1080p 23.98/24/25/29.97/30/50/59.94/60
    • 1920x1080i 50/59.94/60
    • 1280x720p 23.98/24/25/29.97/30/50/59.94/60
    • 720x576i50
    • 720x480i59.94
  • Support YUV BT.601, YUV BT.709 signals
  • Support 48KHz 8-channel audio output
  • SD/HD/3G-SDI BNC output
  • Support SD (ST 259)/HD (ST 292)/3Ga (ST 425)/3Gb (ST 425)/3Gb-DL (ST 425)/3Gb-DS (ST 425) SDI standards
  • Output 3G-SDI signal and transmitted distance greater than 100m (328ft)

Decoding Features

  • Decoding up to 2Kp60 streams of Full NDI, NDI®|HX, NDI®|HX2, NDI®|HX3, RTSP, HTTP, HLS, RTMP Pull/Push, and MPEG-TS over UDP/SRT/RTP protocols
  • H.264/H.265 video decoders
  • AAC/MP3 audio decoders
  • Support NDI 5.x

Configuration Management

  • Register with Magewell Cloud
  • Remote control via WebUI and Magewell Cloud
  • Provide comprehensive information regarding the device and decoded signals in real-time
  • Allow to configure how a signal is processed and decoded, including:
    • OSD setting, deinterlacing, resolution, frame rate, AR conversion
    • audio gain, sample rate and audio channel mapping
    • network connection
  • Update firmware
  • Support USB RNDIS/ECM
  • Support IE/Edge/Firefox/Chrome/Safari/Opera web browsers
  • Provide HTTP APIs

On-board Control Buttons

  • MENU: press to display the menu, or cycle through the options
  • SELECT: press to display the menu, enter current option, or confirm the selection
  • 16 Position Rotary DIP Switch: set board-index from 0 to F

Network Interfaces

  • 10/100/1000Mbps Ethernet
  • IEEE 802.3af PoE

USB Interfaces

  • USB2.0 Type B
    • 5V/2.1A power supply
    • USB RNDIS/ECM
  • USB3.0 Type A
    • Connecting peripherals (keyboard and/or mouse) to set up device

LED Indicators

  • Power LED status indicator
    • On: power connected
    • Off: power unconnected
  • Decode LED status indicator
    • On: decoding
    • Blinks: decoding error
    • Off: source unselected

Form Factor

  • 100.9mm (L) x 60.2mm (W) x 23.3mm (H)

Accessories

  • USB 2.0 A to B cable
  • 5V/2.1A power adaptor
  • L-bracket

Screw Mounting Hole

  • ¼–20 threaded hole

Power Consumption

  • 5V max current: ~1.05A
  • Max power consumption: ~5.5W

Working Environment

  • Operating temperature: 0 to 40 deg C
  • Storage temperature: –20 to 70 deg C
  • Relative humidity: 5% to 90% non-condensing

Firmware

Firmware

V1.1.938

25.3 MB | 2023.08.10

Descriptions:
  1. Support toggling on/off SSDP. When toggled off, it does not send SSDP multicast packet.
  2. Optimize Auto Reboot, supporting setting periodical auto reboot.
  3. Support HTTPS service, switching HTTPS by uploading CA certificate and CA key.
  4. Support ignoring NDI® HX video PTS, which can ensure smooth output when enabled for the NDI® HX stream with wrong time stamps.
  5. Support setting NDI® transport mode, including TCP (Uni-connection), TCP (Multi-connection), UDP (Unicast), RUDP, UDP (Multicast), which negotiates the transfer mode with the encoder.
  6. Support adding multiple NDI® discovery servers.
  7. Support setting Stream ID for SRT Listener.
  8. Support toggling on/off Decode output. When toggled off, it does not output images.
  9. “set-rndis-config” API adds the “name” parameter, which is used to modify the name of USB device.
  10. Optimize decoding compatibility, and fix known issues.

Related products