Magewell USB Capture HDMI Gen 2 Dongle

£238.00

Magewell Part Number: 32060 One channel HD Capture Dongle

Plug & Play no drivers required

  • HDMI + embedded audio
  • No drivers needed for Windows, Mac, or Linux
  • Automatically determines input video format.
  • Converts it to the specified output size and frame rate.
  • No need to install drivers in Windows, Linux, and Mac OS X, real plug and play.
  • Automatically determine the input video format and automatically convert it to the specified output size and frame rate.
  • Automatically determine the input audio format and automatically convert it to 48 KHz PCM stereo audio.

Magewell USB Capture HDMI Gen 2, record or stream an HDMI signal via USB 3.0. With its HDMI v1.4a input, this capture device will accept resolutions up to 1920 x 1200p60.  The USB Capture HDMI will internally up- or down-covert the input signal to the set resolution. It can also perform frame rate conversion and deinterlacing in real time with its own hardware, taking the processing load off your computer’s CPU.

 

  • Support up to 2048 x 1260p 60Hz video input.
  • Video output support up to 1920x1200p 60 Hz.
  • Video and audio processing is done by the dongle and will not occupy CPU. The processing includes up/down scaling of video resolution, frame rate and audio sampling rate.
  • Support brightness, contrast, hue, saturation, and other image adjustment functions.
  • Support output format: 4:4:4, 4:2:2, YUY2, RGB 24, 8 Bit.

Magewell USB Capture HDMI uses the existing drivers on your computer. The capture device will work with any software that supports those drivers. If you don’t have a USB 3.0 port available, the USB Capture HDMI will work with a USB 2.0 port. The resolution and frame rate capabilities will be reduced due to the restricted bandwidth.

InterfaceVideo EngineSignal Detection & SupportSoftware Environment
Input Interface
• HDMI x1
• Support input resolution up to 2048×2160 pixels

Host Interface
• USB 3.0
8-bit video processing

Deinterlace

Cropping

Color Adjustment

Color Space Conversion

Up/down Conversion

Aspect Ratio Conversion

Mirror and Flip		Auto Detection of Input Signal Format

3D HDMI		OS
• Windows, Linux, Mac, Chrome OS

Driver and Firmware
• Driver Free, Updatable Firmware

Included Software
• USB Capture Utility, Capture Express

Compatible Software
50+

Specifications

USB Capture HDMI Gen 2 Specifications

Supported OS

  • Windows
    • Windows 7/8/8.1/10/Server 2008/Server 2008 R2/Server 2012/Server 2016 (x86 & x64)
  • Linux (support x86, x64 & ARM architecture)
    • Ubuntu 12.04/14.04/16.04/17.04/17.10/18.04 (x86 & x64)
    • CentOS 6.5/7 (x86 & x64)
    • Fedora 25/26/27 (x86 & x64)
    • Red hat 6.5 and above (x86 & x64)
    • Other Linux OS with kernel version 2.6.35 and above
  • Mac
    • OS X 10.9/10.10/10.11
    • macOS 10.12 and above
  • Chrome OS

Recommended OS (tested)

  • Windows
    • Windows 7 Ultimate/8.1 Enterprise/10 Enterprise/Server 2008 R2 DataCenter/Server 2012 R2 DataCenter/Server 2016 R2 DataCenter (x86 & x64)
  • Linux
    • Ubuntu 12.04/14.04/16.04 (x86 & x64)
    • Ubuntu 17.04/17.10/18.04 (x64)
    • CentOS 6.5/7.2 (x86 & x64)
    • Fedora 25/26 (x64)
    • Red hat 6.5 (x86 & x64)
  • Mac
    • OS X 10.9.5/10.10/10.11.2/10.11.3/10.11.4
    • macOS 10.12/10.13.2/10.13.3/10.14.3/10.15

Supported APIs

  • Windows
    • DirectShow
    • Wave API/DirectSound/WASAPI
  • Linux
    • V4L2
    • ALSA
  • macOS
    • AVCaptureSession
    • AudioUnit

Compatible Software

  • Zoom
  • Skype
  • Mircosoft Teams
  • GoToMeeting
  • Gstreamer
  • VLC
  • OBS Studio
  • XSplit
  • QuickTime Player
  • Any other DirectShow/V4L2/AVCaptureSession based encoding or streaming software

Input Interfaces

HDMI

  • DVI-D 1.0
  • HDMI 1.4a

Host Interface

USB 3.0

  • compatible with USB 2.0
  • compatible with USB 3.1 Gen 1

Input features

  • Support for input video resolutions up to 2048×2160

HDMI Specific Features

  • 165MHz HDMI receiver
  • Adaptive HDMI equalizer support for cables lengths up to 30M
  • Support for customized EDID
  • Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
  • Full colorimetry support
  • Support for 8/10/12-bit color depth
  • Support for RGB 4:4:4，YCbCr 4:4:4，YCbCr 4:2:2 color sampling
  • Support for 2 channel IEC60958 audio streams
  • Support for extraction of audio formation information & channel status data
  • Support for extraction of video timing information
  • Support for extraction of 3D format information
  • Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode

Video Capture format

  • Support for capture resolutions up to 2048×2160
  • Support for capture frame rates up to 120fps (Actual capture frame rate can be limited by the USB bandwidth and internal working frequency. Typical capture frame rates on the Intel USB3.0 controller are as follows.)
    • 1920×1080 YUY2 (up to 75fps)
    • 1920×1080 RGB24 (up to 60fps)
  • Support for YUY2 & UYVY 4:2:2 8-bit
  • Support for RGB24 & RGB32 4:4:4 8-bit
  • The default capture format is YUY2. More capture formats can be set using USB Capture Utility.

Video Processing Features

  • Video processing pipelines with 160 Mpixels/s processing bandwidth
  • Video cropping
  • Video scaling
  • Video de-interlacing
    • Weave
    • Blend top & bottom field
    • Top field only
    • Bottom field only
  • Video aspect ratio conversion
    • Auto or manual selection of input aspect ratio
    • Auto or manual selection of capture aspect ratio
    • Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
  • Video color format conversion
    • Auto or manual selection of input color format & quantization range
    • Auto or manual selection of capture color format, quantization range & saturation range
    • Support for RGB, YCbCr 601, YCbCr 709 color formats
    • Support for Limited or Full quantization range
    • Support for Limited, Full & ‘Extended gamut’ saturation range
  • Video frame rate conversion
  • Vertical flip and mirror

Multiple devices on one computer

  • Support for connecting multiple USB devices to one system
  • Support for setting the device serial number as the device name shown in the system using USB Capture Utility

SDK

The USB Capture SDK provide functions including signal status extraction, capture configuration and real-time audio & video capture, etc

Firmware Upgrade

  • Multiple devices in one system can be upgraded simultaneously

LED Indicator

Status LEDs indicate the working state of each channel:

  • Pulsing slowly: idle
  • On: input signal locked
  • Off: input signal unlocked
  • Double blinks: memory failed or FPGA configuration failed

Form Factor

  • 92.2mm (L) x 40.2mm (W) x 12.3mm (H)

Accessories

  • USB 3.0 cable

Power Consumption

  • 5V max current: ~0.5 A
  • max power consumption: ~2.5 W

Working Environment

  • Operating temperature: 0 to 50 deg C
  • Storage temperature: –20 to 70 deg C
  • Relative Humidity: 5% to 90% non-condensing

Accessories

INCLUDED

 

magewell-usb-cable

     USB 3.0 Cable: P/T: 90062

 

 

Related products